Who would you recommend for glazing equipment materials and suppliers?

Equipment Materials and Suppliers
  • Working with ACRYLITE®
  • Test Data Results
  • Fire Test Performance
  • Equipment Materials and Suppliers
  • Product Properties
  • Care & Maintenance
  • Application Advice
  • Cementing
  • Glazing

Who would you recommend for glazing equipment materials and suppliers?

Silicone Sealants  
795 Builders Sealant
Dow Corning Customer Service
P.O. Box 1206 Ashmond Center
Midland, Michigan 48640
1-800-441-4369
517-636-1000
Fax: 517-832-1465
www.dow.com
Silpruf
GE Silicones World Headquarters
260 Hudson River Road
Waterford, NY, 12188
1-800-255-8886
www.ge.com
Dry Gaskets EPDM
Santoprene
Advanced Elastomer Systems
260 Springside Drive
Akron, Ohio 44313
216-668-3600
1-800-305-8070
Compatibility must be tested. Available from most profile extruders.
Butyl Tape Foam Tape Closed-Cell Neoprene & Neoprene Foam
No. 440-2 & Polyshim
TREMCO Sealant Systems
3735 Green Road
Beachwood, Ohio 44122
1-800-321-7906
Fax: 216-292-5036
www.tremcosealants.com
CCN Sponge with Adhesive
TREMCO Sealant Systems
3735 Green Road
Beachwood, Ohio 44122
1-800-321-7906
Fax: 216-292-5036
www.tremcosealants.com
Glazing Sealants (Elastomeric)  
PROGLAZE Structural Sealant
TREMCO Sealant Systems
3735 Green Road
Beachwood, Ohio 44122
1-800-321-7906
Fax: 216-292-5036
www.tremcosealants.com
 

Go back

Related articles

What are the proper procedures and equipment for routing ACRYLITE® Resist sheet? Best equipment & methods to thermoform ACRYLITE® rods & tubes What types of circular saw blades should I use for cutting acrylic sheet?