Who would you recommend for thermoforming equipment materials and suppliers?

Equipment Materials and Suppliers
  • Working with ACRYLITE®
  • Test Data Results
  • Fire Test Performance
  • Equipment Materials and Suppliers
  • Product Properties
  • Care & Maintenance
  • Application Advice
  • Cementing
  • Glazing

Who would you recommend for thermoforming equipment materials and suppliers?

The suppliers listed below offer materials and equipment suitable for use with ACRYLITE® acrylic sheet.

Authorized ACRYLITE® Sheet Distributors may also offer some materials and equipment.

Thermoformers  
Plastic Vac, Inc
214 Dalton Avenue
Box 5543
Charlotte, NC 38225
1-800-438-4139
Fax: 704-334-0251
www.pvi-plasticvac.com
Brown Machine LLC
330 North Ross Street
P.O. Box 434
Beaverton, MI 48612
517-435-7741
Fax: 517-435-2821
www.brown-machine.com
Zed Industries, Inc.
3580 Lightner Road
P.O. Box 458
Vandalia, OH 45377
937-667-8407
Fax: 937-667-3340
www.zedindustries.com
 
Forming Supplies  
Mold Surface Coverage
Billiard Table Felt
Available at your local hardware store
 
Temperature Tapes  
Celsistrip
Solder Absorbing Technology
144 Oakland Street
Springfield, MA 01108
1-800-628-8862
Fax: 413-788-0490
www.spirig.com
Thermolable Sensitive Tape
Paper Thermometer Co.
515 East Road
Greenfield, NH 03047
603-547-2034
Fax: 603-547-2073
www.paperthermometer.com
Ovens  
Despatch Industries
63 St. Anthony Parkway
P.O. Box 5320
Minneapolis, MN 55418
612-781-5363
Fax: 612-781-5454
www.despatch.com
The Grieve Corporation
500 Hart Road
Round Lake, IL 60073
847-546-8225
Fax: 847-546-9210
www.grievecorp.com
Trent, Inc. 201 Leverington Avenue
Philadelphia, PA 19127
215-482-5000
Fax: 215-482-9389
www.trentheat.com
MAAC Machine, Inc.
590 Tower Blvd.
Carol Stream, IL 60188
630-665-1700 or
1-800-588-MAAC
Fax: 630-665-7799
www.maacmachinery.com
Blue M Ovens
Revco Technologies
275 Aiken Road
Asheville, NC 28804
800-657-0770
Fax: 828-645-4225
www.revcotech.com
 
Infrared (IR) Pyrometers Magents
Raytek Corp.
Santa Cruz, CA
800-866-5478
831-458-1110
Fax: 831-425-4561
www.raytek.com
Master Magnetics, Inc.
607 S. Gilbert St.
Castle Rock, CO 80104
303-688-3966
Fax: 800-874-6248
www.magnetsource.com

Go back

Related articles

What are the proper procedures and equipment for routing ACRYLITE® Resist sheet? Best equipment & methods to thermoform ACRYLITE® rods & tubes What types of circular saw blades should I use for cutting acrylic sheet?