ACRYLITE® Resist Wave Profile – Colors Warranty
North American Limited Warranty - 10 Year Light Transmission, 10 Year Hail
Roehm America LLC warrants that the above product meets the following specifications:
|3 mm smooth white||3 mm smooth grey||3 mm textured bronze||3 mm prismatic bronze|
|Transmittance ( τD65 )|
|typical on delivery||72%||47%||75%||55%|
|guaranteed on delivery||70%||45%||73%||53%|
|after 10 years||76%||41%||69%||50%|
|Modulus of Elasticity ( E1 )|
|typical on delivery||min. 2,000 MPa||min. 2,000 MPa||min. 2,000 MPa||min. 2,000 MPa|
|after 10 years||min. 2,000 MPa||min. 2,000 MPa||min. 2,000 MPa||min. 2,000 MPa|
|Tensile Strength Value ( σM )|
|typical on delivery||min. 45 MPa||min. 45 MPa||min. 45 MPa||min. 45 MPa|
|after 10 years||min. 40 MPa||min. 40 MPa||min. 40 MPa||min. 40 MPa|
|after 10 years||no break||no break||no break||no break|
Colorless ACRYLITE® burns nearly smoke-free and produces no acutely toxic flue gases. ACRYLITE® is considered harmless in this respect. All product types and designs do not change their combustion behavior within a 30-year period.
Colorless ACRYLITE® has a light transmission when new of up to 92% depending on product type and design. Depending on product type and design, light transmission is only 2-15% lower after 30 years. The transmission factor τD65 is measured as per DIN 5036 on cleaned and polished specimens conditioned in a standardized climate at 23°C/ 50% RH until equilibrium is reached.
The modulus of elasticity E, is determined in the tensile test according to ISO 527-2/1B/1 at 23°C as the average value measured on five specimens with parallel faces, which have been conditioned to the equilibrium state in the standard climate of 23°C/50% RH.
The tensile strength σM is determined in the tensile test according to ISO 527-2/1B/50 at 23°C as the average value measured on five specimens with parallel faces, which have been conditioned to the equilibrium state in the standard climate of 23°C/50% RH.
Breakage by hail within the meaning of this guarantee is defined as at least 5 holes at different points in the surface of multi-skin or corrugated sheets produced by 10 shots during the hail simulation test described below.
Hail Simulation Test: Pellets of polyamide PA 66 with a diameter of 20 mm (weight approx. 4.5 g) are propelled against the weathered surface at speed of 21 m/s, corresponding to a kinetic energy of 1 joule, at room temperature. According to an expert, a natural hailstone of 23 mm (~0.9”) in diameter has an average impact velocity of 17 m/s (~56ft/s), corresponding to a kinetic energy of 1 joule. Furthermore, hailstone study has established that the average frequency of hailstones of more than 10 mm in diameter is only 2.9%. Hailstones of a greater diameter are less frequent.
Light absorption by smoke is measured according to DIN 4101-1 Annex B. ACRYLITE® burns nearly smoke-free, i.e. light absorption by the smoke is < 15%. The acute toxicity of flue gases is measured as per DIN 53436.
CONTINENTAL NORTH AMERICA
TERMS OF LIMITED WARRANTY
TERMS OF LIMITED WARRANTY, EXCLUSIONS
All values shall be determined using cleaned specimens. In case of complex profiles, the measured values shall be determined on flat and plane-parallel specimen, since otherwise the material values cannot be determined with sufficient accuracy. Textured semi-finished goods – only on the more roughly textured side if both sides are textured – must be measured with the textured side facing the light source, at the original thickness. The products must have been stored, transported, processed, installed and used in accordance with the requirements of the subject materials. They must not have been thermally molded or exposed to detrimental effects of harmful chemicals.
DURATION OF LIMITED WARRANTY
This warranty begins with the day of delivery to the purchaser and expires upon deinstallation of the first application, negligent, intentional or willful destruction, or 10 or 30 years, depending on the specifications shown above THE FOREGOING IS THE SOLE WARRANTY APPLICABLE TO THE ACRYLITE SHEET DESCRIBED HEREIN, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO THE WARRANTY OF MECHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY EXCLUDED.
The sole liability of Roehm America in respect of ACRYLITE sheet shall be the replacement of any sheet found by Roehm America not to meet this warranty or, at the option of Roehm America, the refund of the purchase price therefor. Roehm America shall have no liability under any circumstances for the cost of removal of non-conforming product or the installation of replacement product, or for damage to property, or for indirect, incidental, or consequential damages.
Any claims shall exclusively be determined and governed by the version of this warranty statement valid on the date of purchase of the material in question.
IN CASE OF A LIMITED WARRANTY CLAIM
Any rights or claims raised hereunder shall be subject to the following:
- The purchaser must present Roehm America LLC with a bill from the seller showing the name and address of the purchaser, date of purchase, full product type/name and the product quantity so purchased.
- Roehm America LLC will be permitted access without delay to inspect the product and its potential non-conformance on site, or to have another party do so on our behalf.
CONSUMER RIGHTS, APPLICABLE LAW & JURISDICTION
This warranty does not affect or restrict any rights or claims specifically available to consumers under applicable law. This warranty shall exclusively be governed by and construed under the laws of the State of New Jersey, as applicable on the date of purchase of the goods in question, without giving effect to conflict of laws principles. The exclusive place of jurisdiction for any rights or claims from this warranty shall be New Jersey.