Product Properties

Product Properties
  • Working with ACRYLITE®
  • Test Data Results
  • Fire Test Performance
  • Equipment Materials and Suppliers
  • Product Properties
  • Care & Maintenance
  • Application Advice
  • Cementing
  • Glazing
  • General Reference Documents
  • Acrylic vs Glass

Product Properties

Why should I use UV filtering (OP3) acrylic sheet?

ACRYLITE® UV filtering acrylic sheet is a continuously manufactured acrylic sheet specifically formulated to offer excellent ultraviolet (UV) filtering characteristics by blocking out nearly 100% of UV light at 390 nanometers. Its light weight, superior impact resistance, and ease of fabrication make it an ideal choice for framing articles of value. ACRYLITE® UV filtering acrylic sheet is also available with a matte P99 finish to reduce glare. ACRYLITE® UV filtering mar-resistant acrylic sheet combines the same UV protection with an abrasion and chemical resistant coating.


Fabrics and paper become brittle, fade in color, or turn yellow when exposed to sunlight. A good example is street maps or magazines left in a car below the rear window. Printed paper articles left there often change noticeably within a few weeks. Those changes are mainly due to exposure to the UV light in solar radiation.

If a "Probable Relative Damage" (PRD) factor is assigned for different wavelengths, the shortest UV rays would rank highest and the factor would decrease exponentially with increasing wavelength. For example, the PRD factor for UV light of 300 nanometers (nm) would be approximately eight (8), for UV light of 380 nm, one (1), and for visible green light of 500 nm, 0.03. This illustrates the importance of filtering out UV light to protect valuable frameables.


Natural high polymers from cellulose and protein are decomposed by solar irradiation with a high percentage of UV light. Cellulose fibers, from which paper is made, are particularly sensitive to UV radiation. In conjunction with water, which is always present in the fibers, and under UV radiation, atmospheric oxygen reacts with the water to form hydrogen peroxide. This results in a gradual oxidative breakdown of the cellulose. This breakdown is because oxygen and moisture cannot be eliminated, every precaution has to be taken to prevent the exposure of valuable articles of paper or cellulose fiber to UV-light. Similar reactions can be seen in some pigments, causing colors to fade.


UV light is naturally present in sunlight. Approximately 6% of the total irradiated solar energy is in the UV range between 320 and 380 nm. But UV light can also be present in artificial light. Specifically, halogen lamps emit a considerable amount of UV light, and even common fluorescent lamps emit light in the UV range.

The following chart shows the light transmission of ACRYLITE® Gallery UV filtering (OP3) sheet, general purpose acrylic sheet, and float glass. It illustrates that general purpose acrylic sheet and float glass only filter out a small amount of the UV-light present in solar radiation, whereas ACRYLITE® UV filtering sheet absorbs approximately 98% of the UV light. A further shift of the ACRYLITE® UV filtering sheet curve to the right would cause absorption of blue visible light and cause a yellowish appearance of the framed object.

UV filtering spectral transmittance chart

Go back

Related articles

Why doesn't ACRYLITE® acrylic sheet yellow? What are the sheet width, length, and squareness cutting tolerances of ACRYLITE® extruded (FF) sheet? Design options