Do you have information on white ACRYLITE® light transmissions?

Product Properties
  • Working with ACRYLITE®
  • Test Data Results
  • Fire Test Performance
  • Equipment Materials and Suppliers
  • Product Properties
  • Care & Maintenance
  • Application Advice
  • Cementing
  • Glazing

Do you have information on white ACRYLITE® light transmissions?


Acrylic sheet can be formulated in thousands of different colors and shades. This is because colorless acrylic sheet transmits visible light uniformly throughout the entire visible light spectrum. Therefore, its transmission characteristics can be predictably modified using dyes and pigments to create a variety of colored sheets. The addition of fillers and the application of surface textures or patterns are also used to vary the light transmission and reflection properties of the sheets. Ultimately, the color of the sheet results from the combination of transmitted and reflected light that the human eye receives from the sheet. Since the ratio of transmitted to reflected light and the nature of the light source can vary based on application parameters, the perceived color of a sheet can also vary with these parameters. Therefore, it is very important to evaluate colors under the intended end use conditions. To assist in color selection, light transmission and reflectance measurements can be used but actual evaluation in the end use is always recommended to ensure the expected results.

Light Transmission of White Translucent ACRYLITE® cast (GP) or ACRYLITE® extruded (FF) Sheet

White translucent ACRYLITE® cast (GP) and ACRYLITE® extruded (FF) sheet is available in different densities to provide a variety of options for light transmission, diffusion, lamp hiding power, and surface brightness. For lighting applications, a formulation offering maximum diffusion combined with high light transmission is usually desirable.

The color transmission of each white ACRYLITE® cast (GP) or ACRYLITE® extruded (FF) sheet will vary with the type and concentration of the pigment in the sheet. In addition, the light transmission of almost every translucent white color will decrease with an increase in thickness. (See Tables A and B and Graph 4). This is due to the fact that the pigment concentration for most of the translucent white colors is not changed for different thicknesses. Although the pigment concentration remains constant, the amount of pigment absorbing the light that passes through these sheets will increase with the sheet thickness. For instance, when light passes through a ¼” thick sheet it will pass through twice as much pigment as when it passes through a 1/8” inch thick sheet. Therefore, the ¼” thick sheet transmits less light than the 1/8” thick sheet.

Color No.
New (Old)
  3mm (0.118") 4.5mm (0.177") 6mm (0.236")
WM22 (051-6) 67% 54% 44%
WM31 (020-4) 51 41 32
(049-3) * 40 40 40
WM30 (015-2) 30 22 16
WM12 (048-2) 21 15 11

Above values are based on ASTM Test E-308, using CIE Illuminant C.

*The transmission of 049-3 is the same for all thicknesses.

Go back

Related articles

What are the physical properties of ACRYLITE® Resist acrylic sheet? Which side of ACRYLITE® non-glare (P99) sheet should face the artwork? Textures ribbed measurements and sheet direction