Test Data Results

Test Data Results
  • Working with ACRYLITE®
  • Test Data Results
  • Fire Test Performance
  • Equipment Materials and Suppliers
  • Product Properties
  • Care & Maintenance
  • Application Advice
  • Cementing
  • Glazing
  • General Reference Documents
  • Acrylic vs Glass

Test Data Results

Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

(ASTM D-4802-10 replaced ASTM D-4802-02)

Category1 Finish2 Type Roehm America LLC Product
A-1 1 UVF (UV Filtering) ACRYLITE® OP2
    UVT (UV transmitting)  
    neither ACRYLITE® cast (GP) (check tolerance)
ACRYLITE® GMU
  2 UVF none
    neither ACRYLITE®Satinice (P95)
ACRYLITE® Satinice (DP9)
  3 UFV  
B-1 1 UVF ACRYLITE® Gallery UV-filtering (OP3)
    neither ACRYLITE® Premium (FF)
  2 UVF ACRYLITE® Gallery UV-filtering (OP3 P99)
    neither ACRYLITE® Gallery non-gallery (P99)
ACRYLITE® Satinice velvet texture (DP9)
ACRYLITE® Satinice velvet texture extruded (P95)
  3 UVF ACRYLITE® Gallery UV-filtering non-glare (OP3 P99)
    neither ACRYLITE® Optical mar-resistant (MR1)

1Category A-1 is cell cast material; B-1 is continuously manufactured.

2Finish 1 is smooth or polished; finish 2 is patterned, textured, or frosted; finish 3 is abrasion-resistant-coated.

Tolerance on ACRYLITE GP sheet now goes by the ISO standard which is different from the ASTM standard.

Standard ACRYLITE FF sheet does not meet ASTM D-4802-16 in 0.125" (1/8") thickness and thinner due to thickness tolerance restrictions. ACRYLITE® FF5 acrylic sheet is available to meet these requirements if needed.

Go back

Related articles

Which of your acrylic products meet various military specifications? Can ACRYLITE® Multi-Skin Sheets be used to reduce the transmission of sound? Do your acrylic sheet products contain BPA (bis-phenol A)?