What is the coefficient of thermal expansion for your materials and how do I figure out expansion and contraction for a glazing application?

Glazing
  • Working with ACRYLITE®
  • Test Data Results
  • Fire Test Performance
  • Equipment Materials and Suppliers
  • Product Properties
  • Care & Maintenance
  • Application Advice
  • Cementing
  • Glazing

What is the coefficient of thermal expansion for your materials and how do I figure out expansion and contraction for a glazing application?

Acrylic sheet expands and contracts approximately 3 times more than metals and 8 times more than glass. A calculation for expansion and contraction is as follows:

Total Movement (in) = Sheet Length x Temperature Difference x Coefficient of Thermal Expansion

Product Coefficient of Thermal Expansion (in/in-°F)
ACRYLITE® LED sign grade acrylic sheet 0.000044
ACRYLITE® Resist 65 acrylic sheet 0.000044
ACRYLITE® Resist 45 acrylic sheet 0.000040
ACRYLITE® premium acrylic sheet 0.000040
ACRYLITE® Optical mar-resistant acrylic sheet 0.000040
ACRYLITE® cast acrylic sheet 0.000040
CYROLON® polycarbonate sheet 0.000038

For Dark Sheets — Multiply the Total Movement by a 1.4 safety factor due to solar energy absorption.

Installation should occur in the mid-temperature range because at this point the expansion and contraction is at the minimum.

Go back

Related articles

Guidelines for specifying EPDM gaskets Do your products meet Federal Motor Vehicle Safety Standard for Safety Glazing (FMVSS 205) (utilizing ANSI Z26.1) or Federal Motor Vehicle Safety Standard 302, Flammability of Interior Materials? Should I test all EPDM gasket for compatibility in glazing applications?