ACRYLITE® Product Compliance And Certificates

POLYVANTIS Sanford LLC has received confirmation from ICC Evaluation Service, LLC (ICC-ES) that ACRYLITE® Premium (FF), Resist 65, Resist 75, LED Sign Grade and Optical Mar Resistant extruded acrylic sheets comply with the provisions of the 2012, 2015, 2018, and 2021 International Building Code® (IBC). This confirmation, as evidenced by ICC-ES evaluation report ESR-1260, provides guidance to code officials faced with approving the use of these ACRYLITE® extruded sheets under these codes. The evaluation report is available online at icc-es.org.

The Miami-Dade County Product Control Section has accepted ACRYLITE® Resist 65 and LED Sign Grade extruded acrylic sheets to be used in the Florida High Velocity Hurricane Zone. Details of the acceptance and the specific products covered are available in the ACRYLITE® Miami-Dade County Notice of Acceptance (NOA).

“Businesses are required to provide a "clear and reasonable" warning before knowingly and intentionally exposing anyone to a listed chemical, unless the business can show that the anticipated exposure level will not pose a significant risk of cancer or is significantly below levels observed to cause birth defects or other reproductive harm. This warning can be given in several ways, such as by labeling a consumer product, posting signs at the workplace or publishing notices in a newspaper. The requirement to provide warnings takes effect one year after a chemical is added to the list.” (source: www.p65warnings.ca.gov)

• ACRYLITE® Acrylic Products
• ACRIFIX® Cements and Cleaners

Section 1502 of the Dodd-Frank Act of 2012 requires supply chain auditing when compounds of Tantalum (Ta), Tin (Sn), Tungsten (W), or Gold (Au) are intentionally added to affect the functionality of a product. These compounds are known by the acronym 3TG. The legislation attempts to reduce sourcing of the 3TG metals from conflict regions. POLYVANTIS Sanford LLC does not intentionally add 3TG compounds to ACRYLITE® and ACRIFIX® products.

• ACRYLITE® and ACRIFIX® Conflict Minerals Statement

The RoHS legislation seeks to restrict certain hazardous substances from electrical and electronic equipment made or imported into the European Union. This helps protect workers and the environment, especially during recycling of electronic goods.

The REACH legislation creates a Candidate List of Substances of Very High Concern (SVHCs). These are substances considered to have very serious effects on human health and the environment. Substances are included on this Candidate List after a formal nomination procedure. If an SVHC substance is contained in an article above 0.1% w/w, it may trigger additional obligations for companies importing the article into the European Union.

• ACRYLITE® Acrylic Products
• ACRIFIX® Cements and Cleaners

The US Food and Drug Administration (FDA) regulates acrylic polymers for food contact under the Code of Federal Regulations Title 21, Part 177, Section 1010 (21 CFR 177.1010). Six grades of ACRYLITE® acrylic sheet meet this regulation.

• ACRYLITE® Sheet Food Contact Statement

ISO Certificates
Quality Management System DQS Certificate, ISO 9001 : 2015
Environmental Management System DQS Certificate, ISO 14001 : 2015

POLYVANTIS Sanford LLC Business Management System Policy
The organization pledges to implement and operate a business management system associated with the manufacturing of ACRYLITE® acrylic products. We are committed to:

• Protect the environment, including the prevention of pollution, and the health, safety and security of our employees, our customers and the community in which we operate.
• Comply with all relevant laws, regulations, and other applicable requirements.
• Provide high-quality products and services which consistently meet or exceed the contractual demands and expectations of our customers.
• Establish and review objectives in support of the Business Management System.
• Provide the resources needed to achieve objectives.
• Continuously improve the effectiveness of the Business Management System.
  
  
  

POLYVANTIS Code of Conduct
Compliance at POLYVANTIS

POLYVANTIS Sanford LLC, State of Maine PFAS in Products Statement:

ACRYLITE® and ACRIFIX® Products Maine PFAS Statement

The US EPA, under the Toxic Substances Control Act (TSCA) Section 6(h), regulates 5 substances that are persistent, bioaccumulative and toxic (PBT). POLYVANTIS Sanford LLC does not intentionally add these 5 substances to any ACRYLITE® and ACRIFIX® products.

ACRYLITE® Products TSCA 6(h) PBT Compliance Statement

The United States-Mexico-Canada Agreement (USMCA) regulates trade between the signatory countries. Download and complete the Certificate of Origin form to receive preferential tariff treatment on POLYVANTIS Sanford LLC products exported to Canada or Mexico. The tariff codes for products not originating in the United States are provided on the non-qualified materials statement.

• 2024 Roehm America LLC USMCA Certificate of Origin
• 2024 Roehm America LLC USMCA Non-Qualified Materials
  
  

The United States Food and Drug Administration (USDA) Animal and Plant Health Inspection Service (APHIS) may require information on the plant-derived and animal-derived content of certain products. Download and submit the APHIS Declaration for proof of exemption from APHIS Core reporting requirements for the ACRYLITE® extruded products manufactured in the United States.

• 2024 ACRYLITE® Products APHIS Declaration
  
  

The US Toxic Substances Control Act (TSCA) requires data reporting on the manufacture or importation of certain chemical products. ACRYLITE® sheets, rods, tubes, reels, and blocks are defined as articles and thus exempt from TSCA chemical data reporting.

• 2024 ACRYLITE® Products TSCA Article Declaration