The Solution for Long-Lasting and Resistant PVC Surfaces
ACRYLITE® and EUROPLEX® Films for high-quality PVC laminates
Looking for the right Solution for your application?
Our experts support you from initial evaluation to tailored product recommendations.
PVC decorative laminates are used in a wide range of exterior applications, including window frames, house entrance doors, garage doors, façades, and outdoor furniture. Across these applications, they are continuously exposed to UV radiation, weathering, pollution, and mechanical daily wear throughout their service life. Over time, these influences can lead to color fading, surface degradation, and reduced long-term performance.
PLEXIGLAS® and EUROPLEX® films for PVC laminates are engineered to preserve color brilliance, surface quality, and long-term performance while offering solutions ranging from UV protection and weather resistance to enhanced cleanability and chemical resistance.
Protecting decorative PVC laminates goes beyond appearance
ACRYLITE® and EUROPLEX® films for safeguarding both the substrate and the printed décor, helping maintain a premium appearance while providing reliable protection against environmental influences and varying climate conditions. To ensure reliable long-term performance, ACRYLITE® and EUROPLEX® films offer a wide range of options to suit different climate zones, durability targets, surface finishes, and other industry requirements.
COC & PMMA FOR MICROFLUIDICS
Selecting the appropriate material depends on application requirements.
ACRYLITE® PMMA FILMS
When surface energy makes the difference.
ACRYLITE® PMMA film is typically selected when surface-
driven flow and processing simplicity are important.
- High surface energy supports capillary flow and
can be further enhanced through surface treatment - Optical clarity supports imaging and detection
- Processing remains straightforward across common
fabrication methods
Used in:
- Capillary-driven devices
- Point-of-care systems
EUROPLEX® COC FILMS
When chemistry meets optics.
EUROPLEX® Cyclic Olefin Copolymer (COC) film is selected
when signal stability and environmental resistance are required.
- Low autofluorescence reduces background signal
- Thermal stability supports repeated PCR cycling
- Low water absorption limits dimensional change over time
- Chemical resistance supports a wide range of reagents
Used in:
- PCR-based microfluidic systems
- Fluorescence-based diagnostics
Compare Properties
| Optical clarity | Auto-fluorescence | Thermal resistance | Surface energy | Water absorption | |
|---|---|---|---|---|---|
| ACRYLITE® PMMA Films | High | Moderate | Moderate | Higher | Higher |
| EUROPLEX® COC Films | High | Low | Higher | Lower | Lower |
MATERIALS DESIGNED FOR EFFICIENT PROCESSING AND SCALE-UP
Microfluidic materials must integrate into manufacturing processes without introducing variability. ACRYLITE® PMMA and EUROPLEX® COC films are compatible with a wide range of established processing technologies. These include: laser cutting, micro-milling, and injection molding.
They are also compatible with common bonding methods: thermal bonding, solvent bonding, ultrasonic welding, and laser welding.
This supports consistent device performance and reduces variability during scale-up.
Take the next step
Connect with our experts to discuss your application.