Product Properties

Product Properties
  • Working with ACRYLITE®
  • Test Data Results
  • Fire Test Performance
  • Equipment Materials and Suppliers
  • Product Properties
  • Care & Maintenance
  • Application Advice
  • Cementing
  • Glazing
  • General Reference Documents
  • Acrylic vs Glass

Product Properties

Width and length cutting tolerances of ACRYLITE® extruded (FF) sheet

Sheet is cut on the extrusion line -0/+1/4”

Sheet is cut offline on the Precision Saw -0/+1/16”

Squareness - The two diagonals of rectangular trimmed sheet as manufactured on the ACRYLLITE® FF extrusion line shall not differ by more than 5 mm (3/16") at 25°C (77°F).

 

Go back

Related articles

Why doesn't ACRYLITE® acrylic sheet yellow? Design options Why should I use UV filtering acrylic sheet?