Working with ACRYLITE®

Working with ACRYLITE® Test Data Results Fire Test Performance Equipment Materials and Suppliers Product Properties Care & Maintenance Application Advice Cementing Glazing General Reference Documents Acrylic vs Glass
Working with ACRYLITE®
  • Working with ACRYLITE®
  • Test Data Results
  • Fire Test Performance
  • Equipment Materials and Suppliers
  • Product Properties
  • Care & Maintenance
  • Application Advice
  • Cementing
  • Glazing
  • General Reference Documents
  • Acrylic vs Glass

Working with ACRYLITE®

Thermoforming considerations

Some basic things to consider when thermoforming are:

1. Sheet Requirements - Quality parts require quality sheet. Ensure that sheet meets any required specification. Any specific needs of the sheet (eg., polycarbonate needs to be pre-dried).

2. Forming Environment - Ensure a clean area that is free of drafts.

3. Heating - Ensure even heating to proper temperature. Has heating apparatus been calibrated? Are sample sheets tested for proper temperature? Right temperature for right product (different manufacturer's have different recommendations for their individual sheet.)

4. Mold and Tooling - Mold surface free from defects/dirt. Mold at proper temperature. Adequate vacuum (Initial 29-in Hg, during cycle 25-in Hg).

You can find more information in our tech brief on thermoforming.

Go back

Related articles

What thickness do you recommend for plastic shelving? UV protection difference between your acrylic sheet products Is it possible to laser cut ACRYLITE® Optical mar-resistant acrylic sheet without harming the coating?